Structural Mech II, Int Maint

  • R0175700
  • On Site
  • Milton, Florida, United States
  • Full time
  • PUBLIC TRUST

Perform repairs/maintenance on T-6B components such as inspection, operational test, removal, replacement, repair, troubleshoot, balancing, preservation, and modification of aircraft components. Apply technical knowledge and experience to solve problems and to troubleshoot and repair component discrepancies. Must be able to read, write, and interpret instructions, technical manuals, and/or directives necessary for the accomplishment of job assignment. Must be able to exercise judgment in determining work sequence, selecting tools and testing requirements. Most of workload entails sheet metal and composite repair. Work is inspected and reviewed for compliance with approved practices.

 

DUTIES AND RESPONSIBILITIES:

  • Perform tasks in accordance with instructions, applicable technical data, manuals, and directives.
  • Identify, select and work with aircraft structural repair materials such as metals, fasteners and common hardware.
  • Remove, reinstall, repair, fabricate or replace defective parts on all components. Most of the work consists of sheet metal repairs to components such as flight controls, stabilizers, doors, and canopy assemblies. 
  • Ensure that all aircraft parts/components received for repair are properly documented by a valid repair order, ensuring repaired, serviceable, or unserviceable parts are properly tagged/identified, turned in and/or disposed of as required. Perform damage repairs and minor structural modifications under the direction of a higher rated structural mechanic.
  • Manufacture aircraft structural parts, components and assemblies using identical parts, drawings and templates in accordance with recommended procedures and/or verbal instruction.  
  • Verify discrepancy before repairs begin. Evaluate components and documented discrepancies to identify methods of repair and/or replacement. Identify and orders necessary parts, materials and tooling requirements.
  • Perform structural repair maintenance on related maintenance support equipment such as maintenance stands and GSE.
  • Utilize manufacturer’s maintenance manuals, service bulletins, Maintenance Engineering Directives, Maintenance Requirement Cards, Technical Directives, schematics, drawings, blueprints, charts and other applicable data/publications to replace, repair, test, modify, and rebuild aircraft components.
  • Comply with and follow established standards of workmanship, safety, quality, and production.
  • Use technical data, maintenance instructions, MRC's, drawings, sketches and other related maintenance manuals as required in conjunction with and as related to aircraft structural maintenance.
  • Work with and repair plastic components, and perform fiberglass repair
  • Fabricate aircraft (metal) tube assemblies as required.
  • Use, inspect and maintain common metal working tools and equipment.
  • Perform aircraft preservation/de-preservation as required.
  • May be required to perform collateral duty inspection assignments.
  • Complete and/or assist in the completion of applicable maintenance forms as required.
  • Operate ground support equipment as required.
  • Required to be Aircraft Handler and brake rider certified
  • Perform aircraft jacking operations as required.
  • Identify and treat corrosion.
  • Comply with all established general and industrial safety rules and regulations applicable to the contract, facilities and job assignment.
  • Provide technical assistance, guidance, and instruction as required for training of personnel in the same or lesser grade classifications. Demonstrate job procedures and conducts on-the-job training.
  • Assist as directed to ensure safety, security and preservation of Government/Company owned equipment.
  • Ensure compliance with all established general and industrial safety rules and regulations as applicable to the contract, site, and work center. 
  • Participate in the proper maintenance and cleanliness of spaces and facilities.
  • Provide own hand tools as required.
  • Perform other related duties as assigned, consistent with the employee’s qualifications and experience.

 

 

CLASSIFICATION QUALIFICATION:

 

 

KNOWLEDGE:

 

Must possess a high degree of knowledge/expertise in aircraft maintenance, including knowledge and experience on T-6 or similar aircraft. Must have in-depth knowledge of applicable technical manuals, service bulletins, maintenance manuals, blueprints, maintenance forms, and continuous inspection procedures. Ability to organize and plan work. Must possess mathematical skills. Must be able to read, write, understand and communicate the English language and to follow and administer verbal and written instruction. Must have a strong background in sheet metal repair. Requires the ability to work with or without direct supervision.

 

EDUCATION/LICENSES:

 

Satisfactory completion of U. S. Armed Forces aircraft structural repair courses or equivalent. F.A.A. Airframe license preferred but not required. Courses/Training utilized to meet minimum qualifications, that are not specifically listed, must be approved by CNATRA. Graduation from High School or GED required. Must be able to meet any Government/Company licensing/qualification requirements for the position. Must possess a valid U.S. driver’s license.

 

EXPERIENCE:

 

Must have a minimum of three (3) years’ experience as an aircraft structural mechanic. Must be familiar with aircraft systems, tools, drawings, schematics and normal safety requirements. Must have experience in corrosion detection, treatment and prevention.

 

EQUIPMENT OPERATED:

 

Aircraft ground servicing equipment including vehicles, tugs, tractors, servicing carts, aircraft jacks, test equipment, hand tools, power tools.

 

 

 

 

 

PHYSICAL EFFORT:

 

Requires sitting, standing, and walking for extended periods of time.  Requires frequent climbing, bending, stooping, squatting, crawling, crouching, kneeling, lifting, carrying, balancing and reaching above shoulder level, lifting, pushing or pulling weight up to 70 pounds.  Requires eye-hand coordination and manual dexterity.  Must have close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.  Must successfully pass a Company pre-employment drug screening prior to employment, pass a Company physical prior to permanent appointment to the classification and maintain required physical qualifications for their classification thereafter.

 

WORKING CONDITIONS:

 

Requires shiftwork and a diversity of working conditions that range from a standard shop type environment, where there may be no physical discomfort, to an environment where inclement weather may subject individuals to severe changes in temperature, wind, rain, direct sun, etc. May be required to work in areas where noise hazards are prevalent.  Must properly wear personal protective equipment as required. Will be required to work with hazardous materials.

 

POTENTIAL HAZARDS:

 

Exposure to high intensity noise levels, extreme changes in temperature, materials identified on Safety Data Sheets, working at heights on or around aircraft and machinery.  Exposure to hazards associated with the use of hazardous materials, performing sheet metal repairs, working in the vicinity of protruding components such as propellers, exhaust stacks, static wicks, flaps, doors, antennas etc.

 

WORK LOCATION:

 

Aircraft maintenance shops, hangars, and flightline.  May require travel in support of cross-country rescue and detachments of unknown duration.

 

About Amentum

 

Amentum is a global leader in advanced engineering and innovative technology solutions, trusted by the United States and its allies to address their most significant and complex challenges in science, security, and sustainability. Our people apply undaunted curiosity, relentless ambition, and boundless imagination to challenge convention and drive progress. Our commitments are underpinned by the belief that safety, collaboration, and well-being are integral to success. Headquartered in Chantilly, Virginia, we have approximately 50,000 employees in more than 70 countries across all 7 continents.

       

Compensation Details:

44.97

       

Original Posting:

Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.

       

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed,  marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Already an Amentum Employee?

Start your application


 

Accessibility/Reasonable Accommodations

If you are an applicant with a disability that requires a reasonable accommodation to complete any part of the application process, or are limited in the ability—or unable to use—the online application system and need an alternative method for applying, please submit requests to: Accessibility/Reasonable Accommodations